C-MOR Team:
Can I integrate the infrared light switch into the C-MOR surface? I want to switch on the illumination of my FD-7131 camera without logging into the camera!
4XEM 4X-FD7131 infrared light switch
Moderator: michaelr
Re: 4XEM 4X-FD7131 infrared light switch
Yes, this is possible. You can you the PTZ control for this feature!
To enable it, select the camera in the C-MOR Video Surveillance Web and select the configuration menu and on top go to the PTZ configuration. It's not necessary to load a pre-defined camera. Set the IP address of the camera, IP port the username and password and go down to the preset position and enter the values:
/cgi-bin/dido/setdo.cgi?do1=1
Name/description: Light on
/cgi-bin/dido/setdo.cgi?do1=0
Name/description: Light off
To enable it, select the camera in the C-MOR Video Surveillance Web and select the configuration menu and on top go to the PTZ configuration. It's not necessary to load a pre-defined camera. Set the IP address of the camera, IP port the username and password and go down to the preset position and enter the values:
/cgi-bin/dido/setdo.cgi?do1=1
Name/description: Light on
/cgi-bin/dido/setdo.cgi?do1=0
Name/description: Light off
Garry Fisher
http://www.c-mor.com
http://www.c-mor.com